Roof Topper Matting
A safe, simple and economical solution to protecting roofs from damaging foot traffic

     “This is the right product for the right job” is what you’ll be saying once Roof Topper matting is installed and working for you. These solid rubber walk pads are designed specifically for the roofing industry. They are available in two distinctive non-skid designs for safe use even when wet: “Raised Dot” Surface and the low-profile “Tiny-Diamonds” Surface. 

     Installation - Roof Topper Matting is compatible with single-ply and built-up roofing and can be used on all types of new or existing roofs to provide a safe, stable and maintenance-free walkway for access to air conditioning, water supply, communication or electrical equipment. It is non-porous which means it is not affected by freeze/thaw conditions and, when attached to the roof, will stay in place. The roof must be cleared of any loose dirt, debris or moisture before installation. Proper spacing of approximately 2” apart eliminates water damming and allows for expansion during hot weather. Mats are to be adhered with a 100% evenly applied coverage of an adhesive compatible to both the matting and to the substrate. The use of a test section is advisable to determine whether the adhesive is compatible to the substrate. Roof Topper Matting may be installed as a "seamless" unit by decreasing the spacing to approximately 1/4" between mats and filling the spaces with the the compatible adhesive to completely seal the matting and, thereby, eliminating the possibility for moisture to work its way between the mats. Roof Topper Matting can be easily cut to conform to drain openings or other roof obstructions. Ultraseal Adhesive has been found to be compatible with Roof Topper Matting and has been most often proven to be compatible with existing roof substrates over which Roof Topper Matting is to be installed.

Back to Ultraseal Adhesive Product Page

Site Map: The Mat King Web Site in Overview

 Raised Dot Surface

 

Tiny-Diamonds Surface

      Roof Topper Matting can be used to serve as machinery pads, vibration pads or to provide full roof-wide protective coverage. Safety officers can choose Roof Topper Matting in 3/8”, 1/2” or 3/4” thick versions for long-lasting and heavy-duty, heavier-duty and heaviest-duty roof protection.
Product Number Summary Description Detailed Item Information Price
3006-101-2436 ROOF-diamond 3/4 x 24x36 Roof Topper Mat - Diamond Surface, Black, 3/4" thick x 24"x36", 26#, (50 pads/ pallet) (1,700/pads/truck) (NON-STOCKED ITEM) $/pad (rack#: MAZ8275) $19.25
3006-101-2472 ROOF-diamond 3/4 x 24x72 Roof Topper Mat - Diamond Surface, Black, 3/4" thick x 24"x72", 52#, (50 pads/ pallet) (850/pads/truck) (NON-STOCK ITEM) $/pad (rack#: MAZ8274) $36.10
3006-101-3648 ROOF-diamond 3/4 x 36x48 Roof Topper Mat - Diamond Surface, Black, 3/4" thick x 36"x48", 52#, (50 pads/ pallet) (850/pads/truck) (stock item) $/pad (rack#: MAZ8272) $36.10
3006-101-4872 ROOF-diamond 3/4 x 48x72 Roof Topper Mat - Diamond Surface, Black, 3/4" thick x 48"x72", 105#, (25 pads/ pallet) (425/pads/truck) (stock item) $/pad (rack#: MAZ8270) $70.15
3006-201-2436 ROOF-diamond 1/2 x 24x36 Roof Topper Mat - Diamond Surface, Black, 1/2" thick x 24"x36", 17#, (50 pads/ pallet) (2,600/pads/truck) (NON-STOCKED ITEM) $/pad (rack#: MAZ8255) $19.84
3006-201-2472 ROOF-diamond 1/2 x 24x72 Roof Topper Mat - Diamond Surface, Black, 1/2" thick x 24"x72", 34#, (50 pads/ pallet) (1,300/pads/truck) (NON-STOCKED ITEM) $/pad (rack#: MAZ8252) $28.83
3006-201-3248 ROOF-diamond 1/2 x 32x48 Roof Topper Mat - Diamond Surface, Black, 1/2" thick x 32"x48", 30#, (50 pads/ pallet) (1,450/pads/truck) (stock item) $/pad (rack#: MAZ8251) $22.23
3006-201-3648 ROOF-diamond 1/2 x 36x48 Roof Topper Mat - Diamond Surface, Black, 1/2" thick x 36"x48", 34#, (50 pads/ pallet) (1,300/pads/truck) (stock item) $/pad (rack#: MAZ8250) $28.83
3006-201-4872 ROOF-diamond 1/2 x 48x72 Roof Topper Mat - Diamond Surface, Black, 1/2" thick x 48"x72", 68#, (50 pads/ pallet) (650/pads/truck) (stock item) $/pad (rack#: MAZ8240) $56.72
3006-301-2436 ROOF-diamond 3/8 x 24x36 Roof Topper Mat - Diamond Surface, Black, 3/8" thick x 24"x36", 14#, (50 pads/ pallet) (3,200/pads/truck) (NON-STOCKED ITEM) $/pad (rack#: MAZ8298) $13.80
3006-301-2472 ROOF-diamond 3/8 x 24x72 Roof Topper Mat - Diamond Surface, Black, 3/8" thick x 24"x72", 28#, (50 pads/ pallet) (1,600/pads/truck) (NON-STOCKED ITEM) $/pad (rack#: MAZ8294) $26.65
3006-301-3248 ROOF-diamond 3/8 x 32x48 Roof Topper Mat - Diamond Surface, Black, 3/8" thick x 32"x48", 24#, (50 pads/ pallet) (1,800/pads/truck) (stock item) $/pad (rack#: MAZ8291) $20.27
3006-301-3648 ROOF-diamond 3/8 x 36x48 Roof Topper Mat - Diamond Surface, Black, 3/8" thick x 36"x48", 28#, (50 pads/ pallet) (1,600/pads/truck) (stock item) $/pad (rack#: MAZ8292) $26.65
3006-301-4872 ROOF-diamond 3/8 x 48x72 Roof Topper Mat - Diamond Surface, Black, 3/8" thick x 48"x72", 56#, (50 pads/ pallet) (800/pads/truck) (stock item) $/pad (rack#: MAZ8290) $52.37
3007-201-2430 ROOF-button 1/2 x 24x30 Roof Topper Mat - Button Surface, Black, 1/2" thick x 24"x30", 13#, (50 pads/ pallet) (3,300/pads/truck) (NON-STOCKED ITEM) $/pad (rack#: MAZ8281) $11.27
3007-201-2436 ROOF-button 1/2 x 24x36 Roof Topper Mat - Button Surface, Black, 1/2" thick x 24"x36", 13#, (50 pads/ pallet) (3,200/pads/truck) (NON-STOCKED ITEM) $/pad (rack#: MAZ8279) $13.10
3007-201-2472 ROOF-button 1/2 x 24x72 Roof Topper Mat - Button Surface, Black, 1/2" thick x 24"x72", 27#, (50 pads/ pallet) (1,600/pads/truck) (NON-STOCKED ITEM) $/pad (rack#: MAZ8280) $24.55
3007-201-2490 ROOF-button 1/2 x 24x90 Roof Topper Mat - Button Surface, Black, 1/2" thick x 24"x90", 39#, (50 pads/ pallet) (1,100/pads/truck) (NON-STOCKED ITEM) $/pad (rack#: MAZ8283) $28.85
3007-201-3048 ROOF-button 1/2 x 30x48 Roof Topper Mat - Button Surface, Black, 1/2" thick x 30"x48", 26#, (50 pads/ pallet) (1,650/pads/truck) (stock item) $/pad (rack#: MAZ8277) $19.80
3007-201-3648 ROOF-button 1/2 x 36x48 Roof Topper Mat - Button Surface, Black, 1/2" thick x 36"x48", 27#, (50 pads/ pallet) (1,600/pads/truck) (stock item) $/pad (rack#: MAZ8278) $24.55
3007-201-4872 ROOF-button 1/2 x 48x72 Roof Topper Mat - Button Surface, Black, 1/2" thick x 48"x72", 54#, (50 pads/ pallet) (800/pads/truck) (stock item) $/pad (rack#: MAZ8276) $47.47
3007-301-2430 ROOF-button 3/8 x 24x30 Roof Topper Mat - Button Surface, Black, 3/8" thick x 24"x30", 8.5#, (50 pads/ pallet) (5,100/pads/truck) (NON-STOCKED ITEM) $/pad (rack#: MAZ8288) $10.23
3007-301-2436 ROOF-button 3/8 x 24x36 Roof Topper Mat - Button Surface, Black, 3/8" thick x 24"x36", 9.5#, (50 pads/ pallet) (4,600/pads/truck) (stock item) $/pad (rack#: MAZ8285) $11.85
3007-301-2472 ROOF-button 3/8 x 24x72 Roof Topper Mat - Button Surface, Black, 3/8" thick x 24"x72", 19#, (50 pads/ pallet) (2,300/pads/truck) (stock item) $/pad (rack#: MAZ8286) $22.05
3007-301-2490 ROOF-button 3/8 x 24x90 Roof Topper Mat - Button Surface, Black, 3/8" thick x 24"x90", 25#, (50 pads/ pallet) (1,700/pads/truck) (NON-STOCKED ITEM) $/pad (rack#: MAZ8289) $25.73
3007-301-3048 ROOF-button 3/8 x 30x48 Roof Topper Mat - Button Surface, Black, 3/8" thick x 30"x48", 17#, (50 pads/ pallet) (2,550/pads/truck) (stock item) $/pad (rack#: MAZ8287) $17.72
3007-301-3648 ROOF-button 3/8 x 36x48 Roof Topper Mat - Button Surface, Black, 3/8" thick x 36"x48", 19#, (50 pads/ pallet) (2,300/pads/truck) (NON-STOCK ITEM) $/pad (rack#: MAZ8284) $22.05
3007-301-4872 ROOF-button 3/8 x 48x72 Roof Topper Mat - Button Surface, Black, 3/8" thick x 48"x72", 38#, (50 pads/ pallet) (1,150/pads/truck) (stock item) $/pad (rack#: MAZ8282) $42.50

Use Product Numbers and Description when ordering. Truck load orders which require flat bed "Side Unload" must be noted at time of order. Please refer to the "Detailed Item Information" section of the Price List when ordering. Orders will only be accepted in full pallet quantities.

Note Please:

1.   Non-Stocked Items may not be canceled once production has begun, nor may they be returned once shipped.

2.   All dimensions and weights are nominal.

3.   Prices are exclusive of freight which will be quoted based on quantity being ordered and destination city, state and zip code, which should be submitted with request for quote.

4.   Purchaser is responsible for fuel surcharges, accessorial charges and for freight claims for loss or damage during transit.

5.  The Mat King is not responsible for delays in transit, or for the scheduling of delivery appointments or for missed delivery appointments.

6.   Published prices will prevail in case of dispute.

7.   Prices are subject to change without notice.

8.   Please review order acknowledgement for accuracy.

9.   Every effort will be made to ship on or before the estimated ship date noted on the acknowledgement.

10.  Return of “stocked items” must be in “as new” condition with regard to both product and packaging, and are subject to a 15% restocking fee. Purchaser is also responsible for original outbound freight and any return freight charges or related costs. Items not in “as new” condition may not be returned.

11.  Special items not included in the standard size offerings are subject to appropriate cutting and set-up charges. Orders for such items may not be canceled once production has begun nor may they be returned once shipped.

Warranty

The manufacturer conditionally warrants the Roof Topper Matting against defects in materials and workmanship. Roof Topper Mats are fully warranted for the first three (3) years. Failure after the third year will be warranted to 40% of the then current value in the fourth year, and 20% of the then current value in the fifth year.

Warranty is limited to the purchase price of the product only. No other warranties are expressed or implied. 

This warranty does not extend to deterioration caused by incompatible adhesives or roofing materials. Roof Topper Matting is manufactured from reclaimed SBR material and can be adversely affected by certain adhesives and roof materials. It is therefore recommended that Roof Topper Matting be installed only after the proper adhesive has been determined for the particular roof application. See Installation Instructions for complete details. 

Responsibility for determining suitability for specific applications remains with the architect, engineer, contractor or user/owner. Specifier and user shall assume all liability and responsibility for the application of all products supplied by The Mat King.

Back to Ultraseal Adhesive Product Page

Back to Adhesives and Sealants Index Page

Back to Architectural Matting Index
Site Map: The Mat King Web Site in Overview

THE MAT KING
1600 Old Country Road; Suite 207
Plainview, NY 11803 USA

Phone: 516-501-0744
Fax: 516-501-0753
Phone: 800-442-6544
Fax: 800-Mats-Fax (628-7329)

© 1996-2006 Jandru Mats, Inc. d/b/a The Mat King
All Rights Reserved. Reproduction Prohibited.
It is prohibited to use any graphics in this web site without the written permission of Jandru Mats, Inc.

Designed & maintained by Geoffrey Drew Marketing
Hosted by Geoffrey Drew Marketing