|
Tough
'n' Easy Flooring General Specifications
Made of:
100% Recycled PVC
Design: Interlocking tiles with raised disc or textured
finish, and grid pattern underside.
Maintenance: General maintenance - damp mop. A waxing
may be required after installation. Cylindrical scrubber with combined
vacuum using mild detergents may also be used. Rot proof and resistant
to oil and most chemicals.
Installation: Repair any major imperfections to the
sub floor. Tough 'n' Easy Flooring
can be laid on top on top of imperfections such as small cracks and
rough surfaces and deteriorating substrates. In almost all applications
Tough 'n' Easy Flooring
can be installed without adhesive. Special coatings are available in
gloss or matte finishes. See installation guide for detailed laying
instructions.
Size: Tile with interlocking edges measures 19-5/8”
x 19-5/8”
Thickness: 1/4” average
Weight: 4.23 lb. average
Physical Properties:
| Hardness: |
ASTM
2240, (shore A) 90 + or – 3 |
| MoistureAbsorption:
|
ASTM D 471,
Less than 3% by weight (72 hours @ 70º F) |
| Specific Gravity:
|
ASTM D 792,
(+ or - .02) 1.37 |
| Tensile Strength:
|
ASTM D 638,
2700 PSI |
Testing:
| ASTM F925,
Resistance to Chemicals, on a scale of 0-3 and 0 meaning no surface
dulling, surface attack, or color change. Tough
'n' Easy Flooring
scored a rating of 0 for all chemicals tested. |
| ASTM E 648,
Critical Radiant Flux of Floor Covering Systems using a radiant
heat Energy source: Class 1 |
| ASTM E-662,
Standard Test Method for Specific Optical Density of Smoke Generated
by Solid Materials: 450 or less. |
ASTM D-2047,
Static coefficient of Friction. Conform to American with
Disabilities Act (ADA) specifications. |
| ASTM D-149-97A,
Dielectric strength – exceeded 45 kV (suitable for electrical
facilities). |
Limited warranty: Tough 'n'
Easy Flooring
is warranted against defects in workmanship and material for five years
from the date of purchase.
Other Products:
Single and double edging strips, gloss and matte coatings.
|
